One of the few benefits of being me (and there are very few!) is that occasionally someone will design something cool and contact me to have a closer look at it. This happened recently when Adrian from damneddesigns.com contacted me and asked me to have a look at some of his designs. Naturally, I was intrigued- read on to see what I got and what I thought.
The pocket tool phenomenon extends far beyond the reaches of my boarders and I've been searching far and wide for pocket tools that are worthy of our readers attention. I stumbled upon a knife and tool maker in Italy who doesn't crank stuff out via water jet like some folks but these are handmade tools.
The P Tool XL is 2.9 mm long and made from n690co stainless steel. N690co is a steel similar in composition to VG10 stainless; has good strength and corrosion resistance. With so many pocket tools being comprised of titanium it's nice to see someone using a different material. The weight of the tool has a good feeling to it and inspires confience.
Pry tools and one piece tools have been all the rage for years now and not only is the market flooded with them but one can find multiple on Kickstarter alone that are awaiting funding. Guess you find a cash cow and jump on the bandwagon. Schrade who was bought by Taylor Brands back in 2004 hadn't had a pocket tool in its lineup. Since the acquisition TB has re-released classic items from the Schrade past as well and produce items for the current market.
Schrade released its first version of the titanium pry tool back in 2013; it sold pretty well but not to the tune Schrade was looking for. Schrade made several changes to the design and released an updated version to their pry tool.
Pry tools seem to be a dime a dozen these days with everyone wanting to get in on the action. Pry tools used to be something only the higher end knife makers made as a way to save users from using their knives in ways they were not intended to be used. Since the Atwood craze, the mafket has been flooded by all kinds of styles and designs. Some are very creative and interesting while others giving you the impression that they are out to make a buck.
For years, I never understood the allure of one-piece multitools (OPMTs). I have carried plier-based MTs for as long as I can remember, and I always thought the OPMTs (One Piece Multi Tools)were too small to be of any real use... and besides, I already had full functionality with my plier-based MT, right? Then one day, it dawned on me -- one of these OPMTs could complement my usual EDC! After doing some research, I settled on a TT Chopper from TT Pocket Tools, and now I wonder how I lived without it.
The Chopper is made from 3/16” thick 154CM stainless steel and loaded with features. (pictured next to a Victorinox Classic and a Leatherman Micra for size reference)
What kind of people would write collect and review multitools? Quite simple really- we are designers and do-ers, outdoors types and indoor types, mechanics, doctors, problem solvers and problem makers. As such, we have, as a world spanning community, put every type, size and version of multitool, multifunction knife, pocket knife and all related products to every test we could manage in as many places and environments as there are.